The Polisher is a commercial grade machine that has been evaluated by The Ohio Department of Transportation. It prepares asphalt samples as required when testing for long term traction validation. Standard asphalt samples are prepared for testing by The Polisher in a controlled process. The consistency of the process is critical when comparing data with other samples or correlating data for long term performance.
The Polisher Stand supports The Polisher at an ergonomically efficient height to minimize worker fatigue. It also supports and properly aligns the Filtration System for particle collection. Shelving is included for storage of Polish Discs, tools, testing equipment, etc.
The Work Table provides a solid work platform in the lab. Made with the same ruggedness as The Polisher and The Polisher Stand, the Work Table will surely perform well in your industrial environment.
The Filtration System traps particles from the drain water, minimizing the chance of clogged drain lines in your facility. A disposable filter bag is supported within the tank. The Filter System includes the Filtration Tank, one (1) Filter Bag, mounting/positioning brackets for The Polisher Stand.
The Filtration Tank Cart eases emptying the Filtration System’s tank. While locked to The Polisher Stand, the tank can be slid onto the Filtration Tank Cart. After transporting to a convenient location, the full Filter Bag can be lifted out of its tank and disposed of.
The open weave sewn Filter Bag traps particles from the drain water. When filled, the top may be secured and the Filter Bag discarded.
|Magnetic Check List||D68-13-024-1|
|T-Bolt Clamp for Sample Tray||D68-12-095-1|
|Flow Meter Bracket||D68-12-141-1|
|Lock Out Key Block||D68-12-140-1|
|Safety Interlock Switch||D68-12-005-67|
|240 V Single Phase Cord||6 Feet|
|240 V Single Phase Cord||12 Feet|
|240 V Single Phase Cord||18 Feet|
|240 V / 208 V Three Phase Cord||6 Feet|
|240 V / 208 V Three Phase Cord||12 Feet|
|240 V / 208 V Three Phase Cord||18 Feet|
|480 V Three Phase Cord||6 Feet|
|480 V Three Phase Cord||12 Feet|
|480 V Three Phase Cord||18 Feet|
The Polisher is constructed with a strong rigid steel body and steel components. The machine components are powder coated to ensure a long life and an aesthetic addition to any laboratory. Stainless steel fasteners and shafts are used for a durable and easily maintainable long life. The Polisher comes with an easy-to-follow operations manual, operations procedure magnetic placard, and maintenance check list. The Polisher is typically wired for 240 V single phase, but can also be wired for 240 V three phase, 208 V three phase, and 480 V three phase. The voltage requirements must be specified upon order. For questions or concerns, please contact J.M. Parish Enterprises.
To request a quote for The Polisher, speak to a representative at J.M. Parish Enterprises using the contact information found here.
Polish Discs are required to prepare asphalt samples and are considered a wear item. New Polish Discs should typically be used for each asphalt sample. Polish Discs are made of a special rubber compound and is molded directly to the Polish Disc Plate for easy mounting.
To purchase Polish Discs, call or email J.M. Parish Enterprises using the contact information provided here.